MASTER SUITE ADDITION CONTRACTORS IN ST. PETERSBURG

A St. Petersburg master suite addition typically runs 400-800 sq ft and $150K-$280K, with a 6-9 month timeline from design through final inspection. Scope is primary bedroom + walk-in closet + en-suite bath, usually tied into the existing slab footprint or built as a side-wing extension. Revolution is a general contractor in St. Pete with 20+ W-2 carpenters on payroll, open-book T&M billing with weekly budget reports, and a commercial unlimited GC license for the structural and HVAC tie-in that residential-only contractors can't legally pull permits for. Free estimate: (727) 888-6161.

Most of our St. Pete master suite work goes to one buyer profile: a later-career couple in a 1950s-1970s slab-on-grade ranch or bungalow in Old Northeast, Snell Isle, Shore Acres, Tierra Verde, Bayway Isles, or Crescent Lake who loves the lot, loves the neighborhood, and doesn't want to re-buy at today's St. Pete prices. The original primary bedroom is 11×12 with a closet you can't walk into and a hall bath shared with two other bedrooms. The addition gives them the bedroom, closet, and bath they want without leaving the address they spent decades building toward.

These buyers tend to have done a remodel before. They understand construction. They specifically choose T&M over fixed-bid because they want to see the line items — they know fixed-bid hides the markup. Weekly budget reports, an open-book invoice trail, and a builder who treats them as a partner instead of a transaction is the value they're paying for.

Master suite additions trigger more permit and utility work than people expect. On a typical St. Pete job we pull:

• Building permit through the St. Petersburg Building Department (typically 3-6 weeks on a clean set; add 6-12 weeks for a Certificate of Appropriateness if the property sits in a historic district — Old Northeast, Old Southeast, Roser Park, Historic Kenwood, Granada Terrace, or Ingleside). See our historic renovation page for COA-specific workflow.
• Electrical permit — 400-800 sq ft of new conditioned space often triggers a 200-amp panel upgrade.
• Mechanical permit — the existing HVAC almost never handles the additional load; expect a system replacement or a dedicated mini-split. HVAC load calculation runs during design.
• Plumbing permit for the new bath fixtures and drain tie-in.
• Roofing permit for the roof tie-in — we often re-roof the whole house for seamless integration on visible elevations.

Structural tie-in is where a residential-only license falls short. If the addition removes a load-bearing wall or alters the roof line, you need a structural engineer stamp and a contractor who can legally pull a permit on the structural scope. We hold a commercial unlimited GC license — the same class required for buildings over four stories — which means the same crew that's pouring the new slab can legally cut into the existing structure.

We're a general contractor — Revolution is the single point of accountability from first sketch through final inspection. 20+ W-2 carpenters on payroll handle the framing, structural tie-in, and trim directly. We coordinate the independent architect, the structural engineer, and the selections process through one project manager and one superintendent.

Billing is open-book T&M — every invoice, every receipt, every hour visible — with weekly budget reports landing in your inbox so the budget conversation is always current.

Free estimate: (727) 888-6161 — or request one online. For the parent overview, see home additions. Related cost research: home addition cost guide.